Using Dap Modes And All Channel Stereo (Remote Control) - JVC LVT0858-001A Instructions Manual

Using DAP Modes and All Channel
Stereo (Remote Control)
Once you have adjusted the DAP modes and All Channel Stereo, the
adjustment is memorized for each source.
• You cannot use the DAP modes and All Channel Stereo if no rear
speakers are connected.
• You cannot adjust the effect level for "ALL CH ST."
1
Start playing 2-channel software—either Linear
PCM digital or analog signal—and select the
source.
2
Press SURROUND ON/OFF to activate Surround
mode.
When Surround mode turns on, the last selected Surround mode
will be activated.
• Each time you press the button, Surround mode turns on and
off alternately.
SURROUND
Ι
ON/OFF
R
TT
Ex.: "LIVE CLUB" has been selected.
3
Press SURROUND MODE repeatedly until one
of the DAP modes or "ALL CH ST." you like to
apply appears on the display.
The DSP indicator also lights up on the display.
SURROUND
PR ΙΙ
ANALOG L C R
MODE
LPCM DSP
SUBWFR LFE
DOLBY D AUTO SR
LS S RS
DTS INPUT ATT
4
Press SOUND.
SOUND
The 10 keys now work for sound adjustments.
VOL
VOL
(back to the beginning)
5
Adjust the rear speaker output levels
(from –10 to +10).
• Make adjustments so that the sound level of the selected
speaker is set at the same level as that of the front speakers.
To adjust the left rear speaker level, press REAR•L +/–.
REAR•L
5 6 PR ΙΙ
ANALOG L C R
DSP
LPCM
SUBWFR LFE
DOLBY D AUTO SR
LS S RS
DTS INPUT ATT
To adjust the right rear speaker level, press REAR•R +/–.
REAR•R
8 9 PR ΙΙ
ANALOG L C R
DSP
LPCM
SUBWFR LFE
AUTO SR
DOLBY D
LS S RS
DTS INPUT ATT
Only for "ALL CH ST.": to adjust the center speaker level,
press CENTER +/–.
CENTER
2 3
PR ΙΙ
ANALOG
L C R
LPCM DSP
SUBWFR LFE
DOLBY D AUTO SR
LS S RS
DTS INPUT ATT
6
Only for DAP modes:
Press EFFECT to select the DAP effect level (1 to
5) you want.
• As the number increases, the DAP effect becomes stronger
(normally set it to "EFFECT 3").
EFFECT
PR ΙΙ
ANALOG L C R
LPCM DSP
SUBWFR LFE
DOLBY D AUTO SR
LS S RS
DTS INPUT ATT
To cancel DAP Modes and All Channel Stereo
Press SURROUND ON/OFF so that "STEREO" appears on the
display. The DSP indicator goes off.
VOL
VOL
VOL
VOL
35