Using Preset Tuning - JVC LVT0858-001A Instructions Manual

Tuner Operations
STANDBY
STANDBY/ON
PHONES

Using Preset Tuning

Once a station is assigned to a channel number, the station can be
quickly tuned. You can preset up to 30 FM and 15 AM (MW/LW)
stations.
To store the preset stations
Before you start, remember...
There is a time limit in doing the following steps.
If the setting is canceled before you finish, start
from step 2 again.
1
Tune into the station you want to preset (see
"Tuning into Stations Manually" on page 23).
• If you want to store the FM reception mode for this station,
select the FM reception mode you want. See "Selecting the
FM Reception Mode" on page 25.
ANALOG
L R
2
Press MEMORY.
The channel number position starts flashing on the display for
about 5 seconds.
MEMORY
24
CONTROL
5/∞/3/2
Display
TV DIRECT
DVD STB
CONTROL
ANALOG L C R
DSP
LPCM
SUBWFR LFE
DOLBY D AUTO SR
LS S RS
DTS INPUT ATT
SETTING ADJUST MEMORY
DVD STB
MEMORY
Remote
NOT
TUNED ST AUTO MUTING
MH
Z
VOL
TUNED ST AUTO MUTING
MH
Z
VOL
HOME CINEMA CONTROL CENTER
VCR TV TAPE FM/AM
PL ΙΙ
SLEEP AUTO MODE TA HEWS INFO RDS TUNED ST AUTO MUTING
HP
MH
Z
KH
Z
INPUT
VOL
ANALOG/DIGITAL
VCR TV TAPE FM/AM INPUT ATT
Source selecting button
(FM/AM)
3
Press CONTROL 3 (or 2) to select a channel
number while the channel number position is
flashing.
CONTROL
4
Press MEMORY again while the selected channel
number is flashing on the display.
The station is assigned to the selected channel number.
• The selected channel number stops flashing and then the
frequency starts flashing.
MEMORY
5
Press CONTROL 3 (or 2) to select another
frequency you want to store while the frequency
flashes on the display.
6
Repeat steps
stations you want.
To erase a stored preset station
Storing a new station on a used channel number erases the
previously stored one.
SURROUND SURROUND
ON/OFF MODE
MASTER VOLUME
TUNED
TUNED
1 5
to until you store all the
ST AUTO MUTING
MH
Z
VOL
ST AUTO MUTING
MH
Z
VOL