Av Compu Link Remote Control System - JVC TH-S3 Instructions Manual
Dvd digital theater system
Hide thumbs
Also See for TH-S3:
- Instructions manual (172 pages) ,
- Service manual (65 pages) ,
- Instructions manual (20 pages)
Table of Contents
Advertisement
AVCOiViPU LINKremotecontrolsystem
The JVC AV COMPU
LINK system
allows
you to enjoy
video or
audio
with the simplest
operation.
If your video/audio
player
(such
as a DVD player, CD player
and VCR) and television
or/and
anaplifier/receiver
support
the JVC AV COMPU
LINK system
and
are tied with the JVC AV COMPU
LINK cable(s),
simply
starting
the player will automatically
make all necessary
settings
on the
television
and/or
anaplifier/receiver
to allow you to enjoy the
playback.
AVP_IJJDI
I I I&IV
_llr
_VlVlf
_F
hlllll
Connectionand setup
Using :m AV COMPU
LINK cable, connect
tile AV COMPU
LINK
terminals
of each component
to one another.
• The center unit setting I_r AV COMPU
LINK is controlled
using
the OTHERS
menu in the preference
display
(see page 33).
• Refer also to the instruction
supplied
with your TV or VCR.
Center unit
I ,v
L,,,..
"._,_==,,*
I;vco,w L ,NK
• If you connect
the center
unit to a television
via AV COMPU
LINK,
set the center unit's AV COMPU
LINK setting as follows.
• When connecting
to the VIDEO-I
input terminal
of the
television:
DVD2
• When connecting
to the VIDEO-2
input terminal
of the
television:
DVD3
• When connecting
to the VIDEO-3
input terminal
of the
television:
DVDI
IMPORTANT
When you make video connection
between
tile player and another
device
(such as a TV) via the composite,
S-video
or component
jacks,
as well as AV COMPU
LINK connection,
see also the
instruction
manual
of the other device.
Notes
for connection
• There may be no description
about connections
to the phtyer in
the instruction
manual
of a television
or VCR. However,
a
television
or VCR with AV COMPU
LINK terminals
indicating
"II," "EX"
or "Ill" can be connected
to the player.
Operation
Tile JVC AV COMPU
LINK system
allows you to enjoy video and/
or andio by simply pressing
Play on the source component
(the
component
which plays back the video or audio,
such as a DVD
player
or VCR).
You do not even have to switch
on power
on the
TV.
1
Turn on the main power of the
television.
2
Insert a disc (or tape) into the source
component.
3
Press _ of the source component.
The following
actions
are performed
automatically:
• Turning
on the television
power.
• Setting the source of the television
to the external
input
(VIDEO-I,
VIDEO-2
or VIDEO-3).
37
Advertisement
Table of Contents
