Selecting The Fm Reception Mode - JVC LVT0858-001A Instructions Manual

To tune in a preset station
1
Press FM/AM to select the band.
The last received station of the selected band is tuned in, and the
CONTROL buttons now work for tuner operations.
FM/AM
R
T
Ex.: When selecting the FM band.
2
Press CONTROL ∞ (or 5) repeatedly until
"< PRESET >" appears on the display.
CONTROL
R ΙΙ
O SR
T ATT
3
While "< PRESET >" still remains on the display,
press CONTROL 3 (or 2) to select a preset
channel number you want.
CONTROL
• Pressing (or holding) CONTROL 3 increases the preset
channel numbers.
• Pressing (or holding) CONTROL 2 decreases the preset
channel numbers.
When using the remote control
1 Press FM or AM.
The last received station of the selected band is tuned in, and the
10 keys now work for tuner operations.
2 Press the 10 keys to select a preset channel number.
• For channel number 5, press 5.
• For channel number 15, press +10 then 5.
• For channel number 30, press +10, +10, then 10.

Selecting the FM Reception Mode

When an FM stereo broadcast is hard to receive or noisy, you can
change the FM reception mode while receiving an FM broadcast.
• You can store the FM reception mode for each preset station (see
page 24).
TUNED ST AUTO MUTING
MH
Z Before you start, remember...
VOL
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1
While listening to an FM station, press
CONTROL ∞ (or 5) repeatedly until
"< FM MODE >" appears on the display.
CONTROL
TUNED ST AUTO MUTING
VOL
2
Press CONTROL 3 (or 2) to select "MONO."
• Each time you press the button, the FM reception mode
alternates between "AUTO MUTING"* and "MONO."
ANALOG
LPCM
DOLBY D
TUNED ST AUTO MUTING
DTS
MH
Z
VOL
* "AUTO MUTING" is the initial setting. If you have already
changed the setting, "MONO" will be shown.
AUTO MUTING : Normally select this.
MONO
To restore the stereo effect
Repeat step 1 , then select "AUTO MUTING" in step 2 .
When using the remote control
1 Press FM.
10 keys now work for tuner operations.
2 Press FM MODE.
• Each time you press the button, the FM reception mode
alternates between "AUTO MUTING" and "MONO."
R ΙΙ
O SR
T ATT
CONTROL
PR ΙΙ
L C R
DSP
SUBWFR LFE
AUTO SR
LS S RS
INPUT ATT
When a program is broadcasted in stereo,
you will hear stereo sound; when in
monaural, you will hear monaural sounds.
This mode is also useful to suppress static
noise between stations. The AUTO
MUTING indicator lights up on the display.
: Select this to improve the reception (but
stereo effect will be lost).
In this mode, you will hear noise while
tuning into the stations. The AUTO
MUTING indicator goes off from the
display. (The ST indicator also goes off.)
TUNED ST AUTO MUTING
VOL
TUNED
VOL
25