JVC LVT0858-001A Instructions Manual page 20

Basic Settings
STANDBY
STANDBY/ON
PHONES
SETTING
Speaker Distance—FRNT D, CNTR D, REAR D
The distance from your listening point to the speakers is another
important element to obtain the best possible surround sound of the
Surround and DSP modes.
You need to set the distance from your listening point to the
speakers. By referring to the speaker distance setting, this unit
automatically sets the delay time of the sound through each speaker
so that sounds through all the speakers can reach you at the same
time.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1
Press SETTING.
The CONTROL buttons now work for basic
SETTING
settings.
2
Press CONTROL ∞ (or 5) repeatedly until
"FRNT D (Front Distance)," "CNTR D (Center
Distance)" or "REAR D (Rear Distance)" (with
the current setting) appears on the display.
*
CONTROL
PR ΙΙ
ANALOG L C R
LPCM DSP
SUBWFR LFE
DOLBY D AUTO SR
LS S RS
DTS INPUT ATT
FRNT D (Front Distance) : To adjust the front speakers
CNTR D (Center Distance): To adjust the center speaker
REAR D (Rear Distance) : To adjust the rear speakers distance
* "3.0 m" is the initial setting. If you have already changed the
setting, another setting will be shown.
16
CONTROL
Display
5/∞/3/2
TV DIRECT
DVD STB
CONTROL
PL ΙΙ
ANALOG L C R
LPCM DSP
SUBWFR LFE
DOLBY D AUTO SR
LS S RS
DTS INPUT ATT
SETTING ADJUST MEMORY
DVD STB
VOL
distance from your listening point.
distance from your listening point.
from your listening point.
HOME CINEMA CONTROL CENTER
VCR TV TAPE FM/AM
AUTO MUTING
SLEEP AUTO MODE TA HEWS INFO RDS TUNED ST
HP
MH
Z
KH
Z INPUT SURROUND
VOL
ANALOG/DIGITAL
INPUT ATT
VCR TV TAPE FM/AM
3
Press CONTROL 3 (or 2) to select the distance.
• Each time you press the button, the distance changes in
0.3 m intervals.
CONTROL
PR ΙΙ
ANALOG L C R
LPCM DSP
SUBWFR LFE
DOLBY D AUTO SR
LS S RS
DTS INPUT ATT
Ex.: When adjusting the front speakers distance.
4 2
Repeat steps
the other speakers.
Left front
speaker
Left rear
speaker
Example: In this case,
set "FRNT D" to "3.0m,"
set "CNTR D" to "2.7m" and
set "REAR D" to "2.4m."
Note:
If you have selected "NO" for the center and rear speakers setting,
you cannot set the speaker distance for the center and rear speakers.
SURROUND
ON/OFF MODE
MASTER VOLUME
3
and to adjust the distance for
Right front
Center speaker speaker
2.7 m
2.4 m
2.1 m
Right rear
speaker
VOL
3.0 m