Reinforcing The Bass; Adjusting The Tone - JVC LVT0858-001A Instructions Manual

Reinforcing the Bass

You can boost the bass level—Bass Boost.
• You have to make these adjustments for each source.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1
Press ADJUST.
The CONTROL buttons now work for sound
ADJUST
adjustments.
2
Press CONTROL ∞ (or 5) repeatedly until
"B. BOOST (Bass Boost)" (with the current
setting) appears on the display.
*
CONTROL
T
* "OFF" is the initial setting. If you have already changed the
setting, "ON" will be shown.
3
Press CONTROL 3 (or 2) to turn Bass Boost
"ON" or "OFF."
CONTROL
PR ΙΙ
ANALOG L C R
LPCM DSP
SUBWFR LFE
DOLBY D AUTO SR
LS S RS
DTS INPUT ATT
ON
: Select this to boost the bass level (Bass Boost).
OFF : Select this to deactivate Bass Boost.
Note:
This function affects the sound outputting only through the front
speakers.
When using the remote control
Press BASS BOOST.
• Each time you press the button, Bass Boost turns on and off
alternately.

Adjusting the Tone

You can adjust the bass and treble sounds as you like.
• You have to make these adjustments for each source.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1
Press ADJUST.
ADJUST
2
Press CONTROL ∞ (or 5) repeatedly until
"BASS" or "TREBLE" (with the current
setting) appears on the display.
*
CONTROL
ANALOG L C R
LPCM
SUBWFR LFE
DOLBY D
LS S RS
DTS
VOL
BASS
TREBLE : To adjust the treble.
* "0" is the initial setting. If you have already changed the
setting, another number (level) will be shown.
3
Press CONTROL 3 (or 2) to adjust the sound
VOL
level.
CONTROL
ANALOG L C R
LPCM
SUBWFR LFE
DOLBY D
LS S RS
DTS
• Pressing CONTROL 3 increases the sound level by 2 steps
(from –10 to +10).
• Pressing CONTROL 2 decreases the sound level by 2 steps
(from +10 to –10).
4
Repeat steps
level.
When using the remote control
1 Press SOUND.
10 keys now work for sound adjustments.
2 Press BASS +/– or TREBLE +/– to adjust the sound level (from
–10 to +10).
The CONTROL buttons now work for sound
adjustments.
PR ΙΙ
DSP
AUTO SR
INPUT ATT
: To adjust the bass.
PR ΙΙ
DSP
AUTO SR
INPUT ATT
Ex.: When adjusting the bass level.
2 3
and to adjust the other sound
VOL
VOL
21