JVC LVT0858-001A Instructions Manual page 45

I
Operating other Manufacturers'
Equipment
By changing the transmittable signals, you can use the
remote control supplied for this unit to operate other
manufacturers' equipment.
• Refer also to the manuals supplied for the other products.
• To operate those components with the remote control, first
you need to set the manufacturers' codes each for DVD
player, STB, VCR, and TV.
• After replacing batteries of the remote control, set the
manufacturers' codes again.
❏ Changing the transmittable signals for operating a
DVD player
1 Press and hold DVD
2 Press DVD.
3 Enter manufacturer's code using buttons 1 – 9, and 0.
4 Release DVD
.
Now, you can perform the following operations on the DVD
player.
DVD
: Turn on or off the DVD player.
PLAY : Start playback.
STOP
: Stop playback.
PAUSE : Pause playback. To release it, press PLAY.
¢
: Skip to the beginning of the next chapter.
4
: Return to the beginning of the current
(or previous) chapter.
Note:
Refer also to the manual supplied with your DVD player.
After pressing DVD MENU with the RDS/DVD MENU
selector set to "DVD MENU," these buttons can be used
for the DVD menu operations.
TA/NEWS/INFO
PTY(
ENTER
PTY SEARCH
Note:
For detailed menu operations, refer to the
instructions supplied with the discs or the DVD
player.
5 Try to operate your DVD player by pressing
DVD .
When your DVD player turns on or off, you have entered the
correct code.
Manufacturers' codes for DVD player
Manufacturer
JVC
Panasonic
Philips
Pioneer
Sony
Toshiba
Yamaha
.
RDS
DVD
MENU
PTY9
DISPLAY MODE
DVD MENU
Codes
01
02
07
03
05
04
06
❏ Changing the transmittable signals for operating an
STB
1 Press and hold STB
2 Press STB.
3 Enter manufacturer's code using buttons 1 – 9, and 0.
4 Release STB
.
Now, you can perform the following operations on the STB.
STB
: Turn on or off the STB.
CHANNEL +/– : Change the channels.
1 – 10, 0, +10 (+100) : Select the channels.
Note:
Refer also to the manual supplied with your STB.
5 Try to operate your STB by pressing STB
When your STB turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of STB,
try each one until the correct one is entered.
Manufacturers' codes for STB
Manufacturer
JVC
Amstrad
BT
Canal Stellite
Canal +
D – Box
Echostar
Finlux
Force
Galaxis
Grundig
Hirschmann
ITT Nokia
Jerrold
Kathrein
Luxor
Mascom
Maspro
Nokia
Pace
Panasonic
Philips
RFT
Saba
Sagem
Salora
Selector
Skymaster
Thomson
TPS
Triax
Videoway
Wisi
Manufacturers' codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
.
.
Codes
01, 02
03 – 06, 33
01
22
22
26
19 – 21, 23
11
30
29
07, 08
07, 19, 39
11
16
13, 14, 36
11
34
13
26, 28, 35
10, 27, 33
15
09, 25
12
37
24, 31
11
31
12, 38
37
24
32
17, 18
07
41