Force Limit; Window Convenience Operation; Operational Faults - Skoda Octavia Owner's Manual

Škoda octavia
Hide thumbs Also See for Octavia:
Table of Contents

Advertisement

The window can be completely opened automatically by briefly pressing the but-
ton down as far as the stop. Renewed pressing of the button causes the window
to stop immediately.
Closing
Lightly press the appropriate button up and hold it until the window has moved
into the desired position.
The window can be completely closed automatically by briefly pressing the but-
ton up as far as the stop. Renewed pressing of the button causes the window to
stop immediately.

Force limit

First read and observe the introductory information and safety warn-
ings
on page 47.
The electrical power window system is fitted with a force limiter. It reduces the
risk of bruises or injuries when closing the windows.
If there is an obstacle, the closing process is stopped and the window goes down
by several centimetres.
If the obstacle prevents the window from being closed during the next 10 sec-
onds, the closing process is interrupted once again and the window goes down by
several centimetres.
If you attempt to close the window again within 10 seconds of the window being
moved down for the second time, even though the obstacle was not yet been re-
moved, the closing process is only stopped. During this time it is not possible to
automatically close the window. The force limiter is still switched on.
The force limiter is only switched off if you attempt to close the window again
within the next 10 seconds - the window will now close with full force!
If you wait longer than 10 seconds, the force limiter is switched on again.
1)
Convenience opening and closing the windows with the button
locking the vehicle or turning off the ignition and opening the driver's or front passenger's door.
Convenience opening/closing of all windows can be operated by locking/unlock-
ing the vehicle as follows.
Settings the window convenience operation
chapter Vehicle settings (button CAR).
The prerequisite for ensuring that the convenience operating feature correctly is
the automatic opening/closing of all windows is operational.
Opening and closing can take place in one of the following ways.
Opening
Closing
You can interrupt the opening or closing process for the windows immediately by
releasing the key or the the button
Convenience opening or closing the window using the key in the driver's lock is
only possible within 45 seconds after locking the vehicle.
The automatic power windows do not work if the vehicle battery was disconnec-
ted and connected while a window is open. The system must be activated.
Activation sequence:
is possible immediately after un-
A

Window convenience operation

First read and observe the introductory information and safety warn-
ings
on page 47.
Press the symbol button  button on the remote control key.
Hold the key in the driver's lock in the unlock position.
Hold button
in the opening position
A
1)
Press the symbol button  button on the remote control key.
Hold the key in the driver's lock in the lock position.
Hold button
in the closing position
A
1)
In the KESSY system, hold a finger on the sensor
A

Operational faults

First read and observe the introductory information and safety warn-
ings
on page 47.
»
Infotainment owner's manual,
» Fig. 23
on page 48.
» Fig. 23
on page 48.
» Fig. 14
on page 38.
1
and interrupting the locking/unlocking.
Unlocking and opening
49

Advertisement

Table of Contents
loading

Table of Contents