Skoda Octavia Owner's Manual page 150

The Cruise Control System may automatically switch off when some brake as-
■
sist systems (e.g. ESC) intervene, when the speed exceeds maximum permissible
engine speed, or a similar event takes place.
The Cruise Control System also remains activated after shifting the gear!
■
Activating/deactivating

First read and observe the introductory information and safety warn-
ings on page 146.
Activating
›
Move switch » Fig. 133 into the ON position.
A
Deactivating
›
Move switch » Fig. 133 into the OFF position.
A
Storing and maintaining speed

First read and observe the introductory information and safety warn-
ings on page 146.
›
Activate the cruise control system
›
Drive at the desired speed.
›
Push the rocker button into the SET/-
B
After you have released the rocker button
you have just stored is kept constant without having to depress the accelerator.
Fig. 133
Operating lever: Cruise control
system controls
» page 147.
» Fig. 133 on page 147 position.
from the SET/- position, the speed
B
Changing the stored speed

First read and observe the introductory information and safety warn-

ings on page 146.
Increasing the speed with the rocker button
›
Push the rocker button into the RES/+
B
If the rocker button is held in the RES/+ position, the speed will increase continu-
ously. Release the rocker button once the desired speed is reached. The set
speed is then stored in the memory.
Decreasing the speed with the rocker button
The stored speed can be reduced by pushing the rocker switch
SET/- » Fig. 133 on page 147 position.
If the rocker button is pressed and held in the SET/- position, the speed will de-
crease continuously. Release the rocker button once the desired speed is
reached. The set speed is then stored in the memory.
If the rocker button is released at a speed of less than approx. 25 km/h, the speed
is not stored and the memory is erased. Once the speed of the vehicle has in-
creased to more than approx. 25 km/h, the speed must then be stored again by
pushing the rocker button
B
Increasing the speed with the accelerator
›
Depress the accelerator pedal.

Releasing the accelerator pedal will cause the speed to drop again to the set
speed.
Decreasing the speed with the brake pedal
The speed can also be reduced by depressing the brake pedal, which temporarily
deactivates the system » page
Switching off temporarily

First read and observe the introductory information and safety warn-
ings on page 146.

The cruise control system is temporarily switched offby pressing the switch
» Fig. 133 on page 147 into the spring-tensioned position CANCEL or by de-
A
pressing the brake pedal.
The set speed remains stored in the memory.
B
» Fig. 133 on page 147 position.
B
B
into the SET/- position.
147.
Assist systems
into the


147