Standards Conformance; Disposal Of The Device - Snom 870 Quick Start Manual

E
N
snom 870 Quick Start Guide
G
L
spill or pour liquids of any kind onto or into the device.
I
• Do not install the device in surroundings at risk for explosions (paint shops, for
S
example). Do not use the device if you smell gas or other potentially explosive fumes.
H
• Do not use the device during thunderstorms. Lightning striking the power grid may
cause electric shocks.
• Warning: The handset contains a magnet, and its earpiece may attract small
dangerous objects such as needles or pins. Please ensure before each use that no
such objects are present.
SELV (Safety Extra Low Voltage) Compliance
Safety status of Input/Output connections comply with SELV requirements.
Warning: To avoid electric shock, do not connect safety extra-low voltage (SELV)
circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV
circuits, and PSTN ports contain TNV circuits. Some LAN and PSTN ports both use
RJ-45 (8P8C) connectors. Use caution when connecting cables.

Standards conformance

This device is CE and FCC-certified and meets European and US health,
safety, and environmental standards.
Unauthorized opening, changing, or modifying the device will cause the
warranty to lapse and may also result in the lapse of the CE and FCC
certifications. In case of malfunction contact authorized service personnel,
your seller, or snom.
• IEC 60950-1:2001
Safety:
•
Certifications:
•
Power consumption:
•
1 x LAN, 1 x PC:
• 2 x IEEE 802.3/1 Gigabit switch
Ethernet:
•
Power: Power over Ethernet
adapter 5V DC

Disposal of the device

This device is subject to European Directive 2002/96/EC and may not be
disposed of with general household garbage.
If you do not know where you may dispose of the device at the end of its
lifespan, contact your municipality, your local waste management provider,
or your seller.
Cleaning
To clean the device, use an anti-static cloth. Please avoid cleaning liquids as they might
damage the surface or internal electronics of the device.
8
FCC Class B, CE Mark
2.5-7 watts (without USB peripherals)
RJ45
IEEE 802.3af, Class 2. If PoE not available: Power