Eyepieces
Adjusting interpupillary distance:
Adjust eyepieces to match interpupillary distance
by moving the eyepieces closer together or further
apart
Adjusting parfocality
Focus on specimen using electronic focusing
controls
Close right eye and adjust the left eyepiece so that
the image appears in focus to your left eye
Close the left eye and adjust the right eyepiece so
that the image appears in focus to your right eye
The eyepieces are now parfocal
Placing a slide on the Z-galvo stage
To avoid touching or damaging the objective,
lower the objective turret all the way using the
focusing buttons
1
Position the slide holder clips as shown above
Insert slide into the holder in a front-to-back
motion (1)
Slide clips inward onto slide to secure the slide (2)
2
1
1
17
2
1
CMN Imaging Core
January 16, 2013