Advertisement
_ Electronic Ovens _ rev. 1 _____________________________________________________________ KF 1010 EV UD
3 3 3 3 .2.11
.2.11 "Humidification" function
"Humidification" function
.2.11
.2.11
"Humidification" function
"Humidification" function
THE HUMIDIFICATION F
THE HUMIDIFICATION F
THE HUMIDIFICATION FUNCTION IS ONLY AVAI
THE HUMIDIFICATION F
NEUTRAL CLIMATE (RED LED OR WHITE LED ALIGHT ON THE CLIMATE LIGHTED BAR). ). ). ).
NEUTRAL CLIMATE (
NEUTRAL CLIMATE (
NEUTRAL CLIMATE (
IT CANNOT BE ACTIVATED WHEN THE STEAM GE
IT CANNOT BE ACTIVAT
IT CANNOT BE ACTIVAT
IT CANNOT BE ACTIVAT
). ). ). ).
CLIMATE
CLIMATE
CLIMATE
CLIMATE
3 3 3 3 .2.11.1 "Humidification" function with cooking cycle deactivated
.2.11.1 "Humidification" function with cooking cycle deactivated
.2.11.1 "Humidification" function with cooking cycle deactivated
.2.11.1 "Humidification" function with cooking cycle deactivated
To activate the "humidification" function press the
second "beep" (the green led on the key goes off) and turn the knob "3" in an anticlockwise
direction (position 19 on the control panel), choosing the number of blue leds alight and,
therefore, the amount of humidity (the more
humidity).
humidity).
humidity).
humidity).
This operation can be carried out for each single phase of the cooking cycle or for each phase
of the cycle.
The "humidification" function can be managed in "manual" cooking mode or it can be
stored in the cycle phases with the other parameters (time / temperature / neutral or dry cycle)
in "programmed" cooking mode.
Until the cooking cycle starts, the amount of preset humidity can be checked for each phase
of the cycle. Just keep the
alight is shown on the climate lighted bar (position 15 on the control panel. Keep the
pressed and turn the knob "3", to change the number of lighted blue leds and the amount of
preset humidity.
When the cooking cycle starts, the green led on the
"humidification" function is active.
During the cooking cycle in "manual" mode, the "humidification" function can be
deactivated at any time and in any cycle phase by pressing the
stops flashing and goes off).
3 3 3 3 .2.11.2 "Humidification" function with the cooking cycle activated
.2.11.2 "Humidification" function with the cooking cycle activated
.2.11.2 "Humidification" function with the cooking cycle activated
.2.11.2 "Humidification" function with the cooking cycle activated
To activate the "humidification" function, press the
pressed, turn the knob "3" in an anticlockwise direction (position 19 on the control panel),
choosing the number of blue leds alight and the amount of humidity (the more blue leds there
are alight the higher amount of humidity).
are alight the higher amount of humidity).
are alight the higher amount of humidity).
are alight the higher amount of humidity).
Release the
function is active.
By acting in the same way, the amount of preset humidity is changed.
During a multi-phase cooking cycle, the "humidification" function remains active for the
entire phase that it has been set for, after which humidification is automatically deactivated.
With the cooking cycle active, the amount of preset humidity can be altered only in "manual
cooking" mode.
In "programmed cooking" mode the stored parameters, and therefore humidification,
cannot be altered until the cycle ends. Consequently the "humidification" function cannot be
deactivated either.
_________________________________________________________________________________________ page 15 _
UNCTION IS ONLY AVAILABLE FOR COOKING CY
UNCTION IS ONLY AVAI
UNCTION IS ONLY AVAI
ED WHEN THE STEAM GENERATOR IS WORKING
ED WHEN THE STEAM GE
ED WHEN THE STEAM GE
the more blue leds there are alight the higher amount of
the more
the more
key pressed until the second "beep" and the number of blue leds
key and the green led begins flashing confirming that the "humidification"
LABLE FOR COOKING CYCLES WITH DRY OR
LABLE FOR COOKING CY
LABLE FOR COOKING CY
NERATOR IS WORKING ( ( ( (
NERATOR IS WORKING
NERATOR IS WORKING
key and keep it pressed until the
blue leds there are alight the higher amount of
blue leds there are alight the higher amount of
blue leds there are alight the higher amount of
key (the beep sounds) and keep it
CLES WITH DRY OR
CLES WITH DRY OR
CLES WITH DRY OR
BLUE LED ON
BLUE LED ON
BLUE LED ON
BLUE LED ON
neutral or dry cycle)
neutral or dry cycle)
neutral or dry cycle)
key flashes, confirming the
key (the green led on the key
the more blue leds there
the more blue leds there
the more blue leds there
= = = =
STEAM
STEAM
STEAM
STEAM
key
Advertisement
