Advertisement
_ TECNOEKA Srl __________________________________________________________ use and instruction manual _
3.2.7 Selecting cooking program number
3.2.7
3.2.7
3.2.7
Selecting cooking program number
Selecting cooking program number
Selecting cooking program number
To select the cooking program number (there are 99 programs in all) press the push button
(from 1 to 99) or the push button
shown on display programs.
display programs. To rapidly view the programs keep the push button pressed.
display programs.
display programs.
3.2.8
3.2.8
3.2.8 Motors at
3.2.8
Motors at
Motors at ½ speed function
Motors at
To activate this function press the push button
the activation. This function remains operative until the push button is pressed a second time. If
this function is included in one of the four cooking stages, the passage to the next cooking
stage is automatically deactivated. This function cannot be activated during a programmed
cooking cyc
cooking cyc
cooking cyc
cooking cycle. le. le. le. By halving the speed of the motors (fans), the heating capacity is halved too and
therefore the cooking times and the amount to be cooked must be adjusted. (The different
noise of the motors is quite normal at reduced speed).
3.2.9
3.2.9 Stop motors functi
3.2.9
3.2.9
Stop motors functi
Stop motors function
Stop motors functi
To activate this function press the push button
the activation. This function remains operative until the push button is pressed a second time.
If this function is included in one of the cooking stages, the passage to the next cooking
stage is automatically deactivated. This function can be activated and deactivated at any time,
even during a programmed cooking cycle.
even during a programmed cooking cycle.
even during a programmed cooking cycle.
even during a programmed cooking cycle.
When the motors (fans) are stopped, the heating elements and climate regulation are
deactivated, therefore if this function is included in a program, it can be used to delay the start
of the cooking cycle or as a pause during the cycle (for leavening the product inside the cooking
chamber).
3.2.10
3.2.10
3.2.10
3.2.10 Pre
Pre- - - - heating function
Pre
Pre
heating function
heating function
heating function
To activate this function press the push button
the activation. The function is automatically deactivated when the pre
The function is automatically deactivated when the pre- - - - heating temperature is
The function is automatically deactivated when the pre
The function is automatically deactivated when the pre
reached, otherwise, it can be deactivated by pressing the push button during a cooking stage
reached,
reached,
reached,
(the oven pre-heating can be cut off at any time).
If this function is activated in a programmed cooking cycle, it is not stored with the other
parameters of the program and, therefore, it must be activated each time a new cooking cycle
is started: either programmed or manual. The function adds a temperature delta
temperature that was set in the first stage of the cooking cycle,
temperature that was set in the first stage of the cooking cycle,
temperature that was set in the first stage of the cooking cycle, to compensate any heat loss
temperature that was set in the first stage of the cooking cycle,
caused by opening the oven door to introduce the food.
If this stage is activated, when the cooking cycle starts the time display shows the wording
"HEAt". As soon as the pre-heating temperature is reached a beeper sounds, which stops only
when the oven door is opened for introducing the food (the wording "HEAt" continues
flashing). When the door is closed, the programmed cooking cycle starts automatically and the
time display shows the set cooking time.
_ page 14 _________________________________________________________________________________________
speed function
speed function
speed function
This function cannot be activated during a programmed
This function cannot be activated during a programmed
This function cannot be activated during a programmed
on
on
on
This function can be activated and deactivated at any time,
This function can be activated and deactivated at any time,
This function can be activated and deactivated at any time,
(from 99 to 1). The selected program number is
. When the green led lights up it confirms
. When the green led lights up it confirms
. When the green led lights up it confirms
The function adds a temperature delta ∆ ∆ ∆ ∆ only to the
The function adds a temperature delta
The function adds a temperature delta
heating temperature is
heating temperature is
heating temperature is
only to the
only to the
only to the
Advertisement
