Advertisement
_ Electronic Ovens _ rev. 1 _____________________________________________________________ KF 1010 EV UD
3.2.2 Programming cooking time
3.2.2
3.2.2
3.2.2
Programming cooking time
Programming cooking time
Programming cooking time
To set the cooking time (from 1 minute to 4 hours) use the knob no. "1". The set values can
be seen on the time display.
time display.
time display.
time display.
3.2.3
3.2.3 Programming cooking t
3.2.3
3.2.3
Programming cooking temperature
Programming cooking t
Programming cooking t
To set the cooking temperature (between 50°C and 270 °C in the cooking chamber and
between 0°C and 100°C for the "∆T" and the core probe) use the knob no. "2". The set values
can be seen on the temperature display.
3.2.4
3.2.4 Programming cooking cli
3.2.4
3.2.4
Programming cooking climate
Programming cooking cli
Programming cooking cli
To set the cooking climate (dry or steam) use knob no. "3". The set value in percentage is
shown on the led bar
led bar formed of: 5 blue leds
led bar
led bar
the knob in an anti-clockwise direction) and 5 red leds
selection (turn the knob in a clockwise direction). The white led shows when the climate
function is not activated.
3.2.5 Selecting cooking stage
3.2.5
Selecting cooking stage
3.2.5
3.2.5
Selecting cooking stage
Selecting cooking stage
To select the cooking stage (from 1 to 4) press the push button
up it shows the stage has been selected. The required cooking parameters (time/temperature/
climate) can be set for each selected stage. The push button can be pressed at any time to
climate) can be set for each selected stage.
climate) can be set for each selected stage.
climate) can be set for each selected stage.
check the time for each cooking stage.
When the oven is operating, the remaining cooking time can be seen for all 4 stages on the
time display (the flashing led shows which cooking phase is actually in progress).
An "infinite" time can be set in the 1
clockwise direction): the time display shows the wording "inF
which is useful for keeping the food hot when it is cooked). The other stages cannot be selected
in these cases.
3.2.6 Selecting cooking temperature
3.2.6
Selecting cooking temperature
3.2.6
3.2.6
Selecting cooking temperature
Selecting cooking temperature
To select the cooking temperature (in the cooking chamber / core probe "∆T") press the
push button
. When the green led lights up it shows the selected temperature, which can be
seen on the temperature display
temperature display.
temperature display
temperature display
Temperature in the cooking chamber
Temperature in the cooking chamber: When the oven is turned on the temperature in the
Temperature in the cooking chamber
Temperature in the cooking chamber
cooking chamber is automatically selected (led alight on
no. "2". When the oven is operating, the set temperature (led alight on ) and the current
temperature in the cooking chamber (led alight on
Core temperature in the food
Core temperature in the food: : : : To set the temperature for cooking inside the food, press the
Core temperature in the food
Core temperature in the food
push button
until the led next to the
When the oven is working (with the needle probe inside the food) the set temperature (led
alight on
) and the current temperature inside the food (led alight on
shown.
∆ ∆ ∆ ∆ T temperature (DELTA
T temperature (DELTA- - - - T) T) T) T): To set the temperature for the "∆T" function, press the push
T temperature (DELTA
T temperature (DELTA
button
until the led lights up next to the ∆ ∆ ∆ ∆ T T T T symbol and then turn knob no. "2". When the
oven is working (with the needle probe inside the food) the current temperature in the cooking
chamber (led alight on
shown.
N.B.: If the cooking chamber temperature and the core temperature for the food are set, the "∆T"
N.B.:
N.B.:
N.B.:
temperature function is automatically deactivated.
If the core temperature for the food is set and then the "∆T" temperature, the cooking chamber
temperature function is automatically deactivated.
_________________________________________________________________________________________ page 13 _
emperature
emperature
emperature
temperature display.
temperature display.
temperature display.
mate
mate
mate
5 blue leds (from 20% to 100%) for the steam
5 blue leds
5 blue leds
) and the set temperature for "∆T" (led alight on ∆ ∆ ∆ ∆ T T T T ) are alternatively
5 red leds (from 20% to 100%) for the dry
5 red leds
5 red leds
The required cooking parameters (time/temperature/
The required cooking parameters (time/temperature/
The required cooking parameters (time/temperature/
st
th
and 4
stages (turn the knob no. "1" in an anti-
inF " (1
inF
inF
) . To set the required level turn knob
) are alternatively displayed.
symbol lights up and then turn knob no. "2".
steam selection (turn
steam
steam
. When the green led lights
st
stage) or "HoLd
HoLd" (4
HoLd
HoLd
) are alternatively
dry
dry
dry
th
stage –
Advertisement
