Appendix L: Remote Viewing Using Internet Explorer - Digimerge DH230 Series Instruction Manual

Appendix L: Remote Viewing using Internet Explorer

APPENDIX L: REMOTE VIEWING USING INTERNET
Along with the CMS-DH remote client software, you can also view your system remotely using
Internet Explorer (version 7 or later recommended). Remote viewing through Internet Explorer
allows for viewing from up to three simultaneous connections.
NOTE: Remote viewing is only compatible with Internet Explorer. 
Mozilla Firefox, Opera, Safari and other browsers are not supported.
To view your system using Internet Explorer:
1. Open Internet Explorer.
2. In the address bar, enter your system's IP address or your Digimerge DDNS domain followed
by :80 — for example, http://192.168.1.1:80 or
http://tomsmith.digimerge.net:80
NOTE: You MUST include
NOTE: If you need help finding your system's IP address, see "How Do I Find My IP and MAC addresses?"
on page 139.
3. Login with the user name admin, and your default system password, 000000.
Login (admin/000000)
4. Right-click on the ActiveX installation bar and click Install ActiveX Control. You will need to
install ActiveX in order to access live viewing.
Install ActiveX
178
EXPLORER
http://
in order to access your system.