Appendix M: Remote Viewing Using Internet Explorer - Digimerge DH200+ Series Instruction Manual

APPENDIX M: REMOTE VIEWING USING
Along with the CMS-DH remote client software, you can also view your system remotely using
Internet Explorer (version 7 or later recommended). Remote viewing through Internet Explorer
allows for viewing from up to three simultaneous connections.
NOTE: Remote viewing is only compatible with Internet Explorer.
Mozilla Firefox, Opera, Safari and other browsers are not supported.
To view your system using Internet Explorer:
1. Open Internet Explorer.
2. In the address bar, enter your system's IP address or your
Digimerge DDNS domain followed by :80 — for example,
http://192.168.1.1:80 or
http://tomsmith.digimerge.net:80
NOTE: You MUST include
NOTE: If you need help finding your system's IP address, see "How
Do I Find My IP and MAC addresses?" on page 115.
3. Login with the user name admin, and your default system
password, 000000.
4. From the new page, click Web Viewer (Use overlay). You
will need to install ActiveX in order to access live viewing.
5. Click the warning bar and select Install ActiveX Control.
6. From the prompt, click Install. The page will refresh and
live viewing will commence.
Remote viewing through Internet Explorer (images simulated)
INTERNET EXPLORER
http://
in order to access your system.

Appendix M: Remote Viewing using Internet Explorer

Click Web Viewer (Use Overlay)
Install ActiveX
Click Install
Login (admin/000000)
http://192.168.1.1:80
145