Using The Stylus - Juniper Field PC Owner's Manual

Restoring the Device to its Factory State
Follow the steps below to restore user storage, settings, and
icons on your Field PC to their original factory defaults.
! !
CAUTION: Restoring the Field PC to its original factory state
permanently erases data saved on the Field PC, any software
you installed, and any changes you made to the Field PC
(including settings changes).
To perform a clean boot, which restores everything but the
"storage" folder, select Reset from the Power Button menu and
immediately press and hold Ctrl + Alt + Del.
To perform a storage clean, which cleans the "storage" folder,
select Reset from the Power Button menu and immediately
press and hold down Ctrl + Alt + 2.
Perform both a clean boot and a storage clean for a complete
reset of factory settings.
Using the stylus
Below are instructions for tasks using the stylus.
To do this . . .
Select an item
Open an item or file
Open a context menu
for an item
Cut or copy
Paste
Drag and drop
Select multiple items
2
Field PC Owner's Manual
Follow these steps
Tap once.
Tap the item or file twice.
Tap and hold the item. The context
menu appears.
Tap and hold until the context menu
appears. Select Cut or Copy.
Tap and hold the area where you
want to paste. Select Paste from the
context menu that appears.
Tap and drag the item to the
destination. Lift up the stylus.
Drag the stylus over the items.