Set up an Outgoing Bluetooth COM Port
Use this option if you want to assign the virtual COM port as
an Outgoing COM port (i.e., you want to use the Field PC to
initiate communications with another device).
Follow the steps below to set up an outgoing Bluetooth COM port.
1. Make sure you have paired with the serial port device you
want to communicate with. To do this, follow the steps in the
section called Create a Bluetooth partnership in this chapter.
2. Select the COM Ports tab.
3. Tap New Outgoing Port, the second option shown.
4. The Add a Device screen appears. Tap on the name of the
device you want to set up as an outgoing port.
54
Field PC Owner's Manual