Using The Touchscreen - Juniper Field PC Owner's Manual

Juniper systems ultra-rugged handheld computer owner's manual

Hide thumbs Also See for Field PC:

Table of Contents

Using the Touchscreen

This section explains how to protect, calibrate, and disable the

touchscreen.

Protecting the Touchscreen

The touchscreen is sealed to protect your device against water

and dust. To protect your touchscreen, we recommend that you

apply a touchscreen protector.

Calibrating the Touchscreen

If the touchscreen is not responding accurately to stylus taps, try

calibrating the touchscreen manually using the following steps:

1. Tap Start > Settings > System tab.

2. Scroll down and tap on the Screen icon.

3. When the Screen window appears, tap Align Screen.

4. Follow the directions to calibrate the touchscreen.

5. After you calibrate the touchscreen, the Screen window

appears again. Tap OK to exit the screen.

Disabling the Touchscreen

To disable or enable the touchscreen, press the BLUE shift key

then the TS key.

Ch 4

Using the Hardware

Table of Contents