Juniper Field PC Owner's Manual page 58

3. Select your target device and tap Next to create a Bluetooth
partnership with the target device. Note: After you have
created a partnership with a device, the device automatically
appears in the list of Bluetooth devices. You do not have to re-
create a device partnership.
4. Enter the passkey on the Field PC and on the device. (See
the documentation for the device for details. If there is no
passkey listed for the device, tap Next, then No.)
5. On the Field PC, select Serial Port and tap Finish.
6. The device appears on the list of partnerships.
7. Choose the COM Ports tab. Choose New Outgoing Port and
tap Next. Select a COM port that is available.
8. Important: Deselect (clear) the Secure Connection checkbox.
Deselecting this option ensures that the device disconnects
the Bluetooth connection only when you tell it to.
9. Tap Finish to save the settings. Tap OK and Done to close the
Wireless Manager application.
Connecting to a Desktop Computer using a Bluetooth Dongle
1. Make the Field PC discoverable.
2. Select the COM Ports tab.
3. Choose New Outgoing Port.
4. Select the device and tap Next.
5. Select an available COM Port.
6. Important: Deselect (clear) the Secure connection option.
Deselecting this option ensures that the device disconnects
its Bluetooth connection only when you tell it to.
7. Tap Finish to save your settings.
8. On your desktop computer, right-click the Bluetooth icon
on your menu bar.
9. Select Add Bluetooth device.
5
Field PC Owner's Manual