Powering Off, Suspending, Resetting, And Restoring Factory Defaults - Juniper Field PC Owner's Manual

Connector Protectors
The Field PC is sealed without the protectors, however the rubber
connector protectors keep dirt and moisture out of the ports.
Powering Off, Suspending, Resetting, and Restoring
Factory Defaults
The Power button allows you to suspend, power off, or reset
the device. A series of keyboard actions also lets you restore
settings, and icons to their original factory defaults. Below are
instructions for each action.
Powering Off the Device
When the device is powered off, it closes all programs and
powers down all system components except for the real-time
clock. Unlike suspend mode, the device resets when it is
powered on again. Any unsaved data will be lost.
To preserve battery power, we recommend you power off the
device if it will be left unused for two weeks or longer.
To power off the Field PC,
1. Save all open files and close any running programs.
2. Press and hold the Power button until the Power Button
menu appears.
Note: The Field PC cannot be powered off while it is plugged into
the wall charger.
26
Field PC Owner's Manual