Data Plate Location; Models Arq, Erq, Grq Self-Contained Floor Unit Ventilator Installation; Receiving & Handling; Visible Loss Or Damage - Daikin ARQ Installation Manual

Models ARQ, ERQ, GRQ Self-
Contained Floor Unit Ventilator
Installation
Figure 1: Data Plate Location
Receiving & Handling
This product was carefully packed and thoroughly inspected
before leaving the factory. Responsibility for its safe delivery was
assumed by the carrier upon acceptance of the shipment. Claims
for loss or damage sustained in transit must therefore be made
upon the carrier, as follows:

Visible Loss or Damage

Any external evidence of loss or damage must be noted on the
freight bill or carrier's receipt, and signed by the carrier's agent.
Failure to adequately describe such external evidence of loss or
damage may result in the carrier's refusing to honor a damage
claim. The form required to file such a claim will be supplied by the
carrier.

Concealed Loss or Damage

Concealed loss or damage means loss or damage which does not
become apparent until the product has been unpacked. The
contents may be damaged in transit due to rough handling even
though the carton may not show external damages. When the
damage is discovered upon unpacking, make a written request for
inspection by the carrier's agent within fifteen (15) days of the
delivery date. File a claim with the carrier since such damage is the
carrier's responsibility.

Storage

If equipment is stored for any length of time before installation, it should
remain in its shipping packaging in a clean, dry, climate controlled area.
Table 2: General Unit Data
Models ARQ, ERQ, GRQ
Nominal Airflow – CFM (L/S)
No. of Fans
Room
Dia. – In. (MM)
Fan Data
Width - In. (MM)
Room Fan Motor Horse Power
Nom. Size – In. (MM)
Filter Data Area – FT
2
Quantity
Approx. Ship Weight – Lbs. (KG)
Refrigerant Charge – Oz.
IM 1083
024
1000 (472)
3
8.12 (206)
8.25 (210)
1/4
10 × 48½ × 1 (254 × 1232 × 25)
(M )
3.37 (0.31)
2
1
690 (310)
84
Self-Contained WSHP Unit Ventilator Models ARQ, ERQ, GRQ

Lifting Unit

A forklift or other lifting device is needed to install this product.
Make sure lifting equipment can handle the weight of the unit
safely. Personal injury may result if improper lifting and moving
methods are used. (See table 2 for approximate shipping weights)
Use 72" length forklift tines, short tines will damage the unit
bottom. Improper handling can damage internal components.
Do not stand the unit on end or stack (see figure 2 & 3)
Figure 2: Stack Units Maximum 2 High as Shown
2 high
Correct
Figure 3: Forklift Lifting Requirements
Unit Overall Dimensions (without end panels)
024 = 86"w × 30"h × 16⅝"d or (21⅞"d w/Adapter Back)
040 = 98"w × 30"h × 16⅝"d or (21⅞"d w/Adapter Back)
048 = 110"w × 30"h × 16⅝"d or (21⅞"d w/Adapter Back)
040
1250 (590)
4
8.12 (206)
8.25 (210)
1/4
10 x 60½ × 1 (254 × 1537 × 25)
4.20 (0.39)
1
720 (325)
130
WARNING
CAUTION
Incorrect
Lifting Points
048
1500 (708)
4
8.12 (206)
8.25 (210)
1/4
10 × 36½ × 1 (254 × 927 × 25)
5.08 (0.47)
2
760 (340)
100
Page 5 of 42