Louver Installations With Typical Unit Arrangements; 16-5/8" Unit Depth - Daikin ARQ Installation Manual

Louver Installation With Typical Unit Arrangements – 16⅝" Unit Depth
Figure 11: The 16⅝˝ (422mm) Deep Unit with Open
Refrigerant Pipe Chase and Floor Level Outdoor Intake
Louver Location
Lintel
(By Others)
Louver
Sealed Cement
Mortar; Pitch
Away From Unit
Figure 12: 16⅝" (422mm) Deep Unit with Open Refrigerant
Pipe Chase & Above-Floor-Level Outdoor Intake Louver
Application with Chased Wall
Lintel
(By Others)
Louver
Not Less
Than 3" (76mm)
Not More
Than
21" (533mm)
Sealed
Cement Mortar;
Pitch Away
From Unit
Provide Drainage
CAUTION
Accumulated moisture can cause property damage if not properly
drained. Installing contractor must provide such drainage.
Page 10 of 42
Unit Refrigerant Piping
1"
Floor Line
(25mm)
Important: Gasket sealing
surface is required.
Unit Refrigerant Piping
1"
Floor Line
(25mm)
Important: Gasket sealing
surface is required.
Self-Contained WSHP Unit Ventilator Models ARQ, ERQ, GRQ
Figure 13: Above Floor Level Outdoor Air Intake with
Accessory Closed Refrigerant Pipe Chase
Lintel (By Others)
Insulated Closure
Plate Accessory
Intake Louver
Not Less Than 3"
Not More
Than 28"
Sealed Cement
Mortar; Pitch Away
From Unit
Provide
Drainage
Figure 14: Floor Level Outdoor Air Intake With Window
Below Unit Top and 9˝ "Finished" (Painted) Accessory
(Insulated) Closed Refrigerant Pipe Chase
Painted Insulated Closure Plate Accessory
Sash
Lintel (By Others)
Intake Louver
Sealed Cement
Mortar;Pitch Away
From Unit
Unit Refrigerant Piping
1"
Floor Line
(25mm)
Important: Gasket sealing
surface is required.
Unit Refrigerant Piping
1"
(25mm)
Floor Line
Important: Gasket sealing
surface is required.
IM 1083