Rack Mounting; Rack Mounting - Front - ATEN KM0032 User Manual

Rack Mounting

The KM0032 / KM0532 / KM0932 can be mounted in a 19" (1U) rack. The
mounting brackets can screw into either the front or the back of the unit so that
it can attach to the front or the back of the rack.

Rack Mounting - Front

To mount the unit at the front of the rack, do the following:
1. Remove the two screws at the front of the unit, as shown in the diagram
below:
Phillips head hex
M3 x 6
2. Use the M3 x 8 Phillips head hex screws supplied with the rack mount kit
to screw the rack mounting brackets into the front of the unit:
Phillips head hex
M3 x 8
Chapter 2. Hardware Setup
15