Installing the Telephony Modem
Requirements
Action
Attaching the
Adaptor
Preparing the Telephony Modem
Before installing the Telephony Modem, use this procedure to install required
and optional accessories.
You need the following items to attach an adaptor:
• RJ-14/RJ-11 adaptor, RJ-21X adaptor, or IDC Rocker adaptor
• Two screws (included with the adaptor)
• Small flat-blade screwdriver
Perform the following tasks as needed.
Task
Attaching the Adaptor
Installing a Battery
The TM608 uses one of three adaptors to attach telephone lines. Follow
these steps to attach the adaptor.
1 If an adaptor different from the required adaptor is already attached to
the TM608, remove the two screws and remove the adaptor from the
back of the TM608.
2 Align the pins on the adaptor with the sockets on the Telephony
Modem, and orient the label on the adapter with the top of the Tele-
phony Modem, and push the adaptor into place.
3 Secure the adaptor using the two screws included with the adaptor.
TM608 Installation Guide Release 6 Standard 1.0 December 2008
7
Pag e
7
8