Table of Contents
Advertisement
4.7 Aggregation
Configuration
Description
Group
Trunk group number
Port #
Click to select the port as member port of the trunk group
[Apply]
Click to apply the configuration change
[Refresh]
Click to refresh current configuration
[Back]
Click to go back to upper menu
Link aggregation function allows making connection between two switches using more than one physical links.
It can increase the connection bandwidth between two switches. The switch supports up to four trunk groups
and the number of member ports belonging to one trunk group is not limited.
Notes:
1. The LACP enabled ports are not available in this configuration..
2. One port cannot belong to two trunk groups at the same time.
3. The member ports of one trunk group must also belong to same VLAN group and have same VLAN
configuration settings. Otherwise, abnormal operation might be experienced.
-46-
Advertisement
Table of Contents
