Table of Contents
Advertisement
4-2-4. VLAN Group Configuration
Function name:
VLAN Group Configuration
Function description:
It shows the information of VLAN Groups, and allows administrators to
maintain them by modifying and deleting each VLAN group. User also can add
a new VLAN group by inputting a new VLAN name and VLAN ID.
If you are in port-based VLAN, it will just show the ID、Member of the existed
port-based VLAN group. If you are in tag-based VLAN, it will show the ID、
VID、Member of the existed tag-based VLAN group. The switch can store the
configuration of port-based VLAN and tag-based VLAN separately. When you
choose one of VLAN mode, the switch will bring you the responded VLAN
configuration which keeps the default data. You can easily create and delete a
VLAN group by pressing <Add> and <Delete> function buttons, or click the
Group ID directly to edit it.
Parameter description:
ID (Group ID):
When you want to edit a VLAN group, you must select the Group ID field.
Then, you will enter Tag Base VLAN Group Setting or Port Base VLAN
Group Setting page, which depends on your VLAN mode selection.
VID:
VLAN identifier. Each tag-based VLAN group has a unique VID. It
appears only in tag-based mode.
Member:
In modify function this is used to enable or disable if a port is a member
of the new added VLAN, "Enable" means it is a member of the VLAN.
Just tick the check box (
)
beside the port x to enable it.
Fig. 4-7 Port-Based VLAN Configuration
57
Advertisement
Table of Contents
