Table of Contents
Advertisement
Operating Conditions
Operation should take place under the following conditions:
- At temperatures between +15°C and +35°C (59 °F to 95 °F).
- At a relative air humidity between 20% and 80%, non-condensing.
- At an atmospheric pressure between 70 kPa and 105 kPa.
- Printer and Print Engine should be protected from excessive environmental debris/dust.
- Printer must be placed on a sturdy floor surface.
- Printer (Printer Engine) must be leveled, using adjustable casters, front to back and left to right.
Exposure to conditions that are not permissible may lead to damage which is not externally visible.
Allow the printer, printhead and ink tanks to acclimate to ambient temperature before using the printer.
Unpacking
Two or more people are required to lift the printer from its packaging.
Remove the Printer and its parts from the carton. Remove all packing tape.
Save the packaging in a safe place, for possible future use.
Contents of Packaging
NOTE: Items are shipped inside the Storage Compartment of the Printer.
The following items are included with your printer:
1.
MACH 8 High Capacity Printer
2.
Ink Tanks – Cyan, Magenta, Yellow, Black, Black
3.
Printhead Cartridge
4.
AC Power Cord
5.
USB Cable
6.
Operations Manual
7.
Driver Software CD
8.
Caster Adjusting Wrench
Note: Ink Tanks and Printhead Cartridges can be purchased through your Dealer/Distributor.
See "Appendix B" for supplies information.
SECTION 2
INSTALLING THE PRINTER
wrench
7
Advertisement
Table of Contents
