Before You Begin; Configuring A Dhcp Server - Sun Oracle Sun Storage 2500-M2 Arrays Hardware Installation Manual

C
A P P E N D I X

Configuring a DHCP Server

This appendix describes how to configure bootstrap protocol (BOOTP) services in a
Sun Solaris and Microsoft Windows environment. It contains the following sections:
"Before You Begin" on page 69
■
"Setting Up a Solaris DHCP Server" on page 70
■
"Setting Up a DHCP for Windows 2000 Advanced Server" on page 73
■
Dynamic IP addresses are assigned through dynamic host control protocol (DHCP)
server BOOTP services.

Before You Begin

You need each controller's media access control (MAC) address to configure the
DHCP server. The MAC address is located on the bar code label at the back of each
controller. Because there are two controller modules per controller tray, you need two
MAC addresses.
69