Sun Oracle Sun Storage 2500-M2 Arrays Hardware Installation Manual page 77

5. Select option 1, Display IP Configuration, to confirm the IP address changes.
Service Interface Main Menu
==============================
1) Display IP Configuration
2) Change IP Configuration
3) Reset Storage Array (SYMbol) Password
Q) Quit Menu
Enter Selection: 1
The IP address configuration of the Ethernet port is displayed, and the Service
Interface menu displays again.
6. Press Q to quit the Service Interface menu.
7. Switch the serial cable to the serial port on the other controller and repeat these
steps to set the IP address on that controller as well.
8. Power cycle the controllers off and on again to reset them with the new IP
address.
When you have completed the IP address configuration for the Ethernet port on both
controllers and power cycled them, see the Sun Storage Common Array Manager
Installation and Setup Guide for instructions on registering and configuring the array.
Appendix B Configuring IP Addressing 67