Table of Contents
Advertisement
9.7.8 Audio Conferencing Unit
Avaya M and T-Series phones are supported by IP Office Release 7.0 and higher on an IP500v2. They can be connected to
digital station ports provided by an IP500 TCM8 base card or on a DS16A/DS30A external expansion module.
The Audio Conferencing Unit (ACU) is a multiple microphone desktop conferencing unit. The Audio Conferencing unit only
supports the following Feature codes:
· Speeddial: Feature 0
This feature code can be used to dial a stored number.
· If Feature 0 is followed by a 3-dight number in the range 000 to 255, the system directory entry with the
matching index is dialed.
· If Feature 0 is followed by * and a 2-digit number in the range 71 to 94, the personal directory entry with the
matching index is dialed.
· Hold/Switch Calls: Feature 2
This feature code will hold the current call. If there was already a call on hold, the feature code will switch between
calls.
· Conference: Feature 3
If the Audio Conferencing Unit has a call connected and another call on hold, using this feature code will conference
the unit and those calls.
· Last Number Redial: Feature 5
When the phone is idle, this feature code can be used to redial the last number dialed from the Audio Conferencing
Unit.
IP Office Basic Edition - Quick Mode Installation
IP Office 8.0
System Components: Phones
15-601042 Issue 24i (20 December 2011)
Page 193
Advertisement
Table of Contents
