Toshiba e-STUDIO 2500c Quick Start Manual page 72

5 SETUP FLOW
Setup Flow
Set up the TCP/IP
Setting the Terminal ID
Set up the Save as file
Setting
Install the Client Software
If you want to send an internet fax using the N/W-Fax driver, you must configure the equipment
to enable the Internet Fax transmission.
P.71 "Setup Flow for Internet Fax"
70 SETUP FLOW FOR FAX FEATURES
Description/Reference
Assign the IP address, Subnet mask, Gateway address. Also, configure the
WINS settings if your Windows network is managed with the WINS server.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol"
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the TCP/IP"
If the optional Fax unit is installed, specify the terminal ID to identify the fax
terminal information.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"SETTING FAX FUNCTIONS"
"Setting the Terminal ID"
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Fax Settings"
"Setting up the Fax Settings"
An administrator should specify the Save as file destination and network
folder to enable the Save as file features on the N/W-Fax driver.
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Save as file Settings"
"Setting up the N/W-Fax Destination"
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Save as file Settings"
"Setting up the N/W-Fax Folder"
Install the N/W-Fax driver from the Client Utilities CD-ROM.
Reference: Network Fax Guide
Chapter 2 "INSTALLING CLIENT SOFTWARE"
"Installing Network Fax Software