Toshiba e-STUDIO 2500c Quick Start Manual page 44

5 SETUP FLOW
Setup Flow for Raw TCP/LPR Printing
This equipment can be used with Raw TCP or LPR printer connection for Windows NT 4.0, Win-
dows 2000, Windows XP, and Windows Server 2003. Raw TCP or LPR printing is the common
method to setting up the printer from servers.
Setup Flow
Connect this equipment
Set up the TCP/IP
Set up the Printing Ser-
vice
42 SETUP FLOW FOR PRINTING FEATURES
Connecting over TCP/IP Network
Setting up the Raw TCP
or LPR printer connection
Description/Reference
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
Chapter 4 "CONNECTING TO THE DEVICE"
"CONNECTING TO THE NETWORK"
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol"
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the TCP/IP"
If users use Windows 2000, Windows XP, or Windows Server 2003 for print-
ing, enable the Raw TCP Printing Service using TopAccess. It is recom-
mended to use Raw TCP printing rather than LPR printing.
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Print Service Settings"
"Setting up the Raw TCP Print"
If any users use Windows NT 4.0, enable the LPD Printing Service using
TopAccess.
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Print Service Settings"
"Setting up the LPD Print"
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003