Pnp/Pci Configurations - Advantech PCM-9588 User Manual

Intel celeron m ebx sbc with dvi/ ttl/ vga/ lvds/ lan/ 6 com/ 2 sata / 6 usb2.0/ 16bit gpio

Hide thumbs Also See for PCM-9588:

Table of Contents

3.2.7

PnP/PCI Configurations

Note!

This "PnP/PCI Configurations" option sets up the IRQ and DMA (both

PnP and PCI bus assignments).

Init Display First [PCI Slot]

This item is setting for start up Video output from PCI or Onboard device.

Reset Configuration Data [Disabled]

This item allow user to clear any PnP configuration data stored in the BIOS.

Resources Controlled By [Auto (ESCD)]

–

IRQ Resources

This item allows you respectively assign an interruptive type for IRQ-3, 4, 5,

7, 9, 10, 11, 12, 14, and 15.

–

DMA Resources

This item allows you respectively assign an interruptive type for DMA, 0, 1, 2,

3, 4, 5, 6, and 7.

PCI VGA Palette Snoop [Disabled]

The item is designed to solve problems caused by some non-standard VGA

cards. A built-in VGA system does not need this function.

PCM-9588 User Manual

Table of Contents