Advantech PCM-9588 User Manual page 13

VGA port
18/36-bit TTL
Display
DVI (36 bit)
LVDS (48 bit)
Intel GMA 900,(166 MHz/160 MHz @1.05v)
2D Display core frequency support from 133 MHz & 190/200 MHz @ Vcc =
1.05 / 1.5 V
depending on Host/Memory configuration
3D Render core frequency support from 133 MHz & 160/166 MHz @ Vcc =
1.05 / 1.5 V
depending on Host/Memory configuration
Features
Two SDVO ports multiplexed with PCI Express graphic interface
Dual Channel LVDS interface support 36 bits
CRT monitor resolutions supported:
Supports up to QXGA(2048x1536)
LVDS panel resolution supported:
Supports up to SXGA (1400x1050)
Dual independent display options with digital display
Analog CRT DAC interface support
Supports max DAC frequency up to 400 MHz
VGA 24-bit RAMDAC support
DDC2B compliant
Digital/Analog Converter for CRT: QXGA (2048x1536)
able to drive a DFP display at a pixel rate of up to 165MHz
supporting UXGA (1600x1200) resolution displays.
DVI
Digital Visual Interface (DVI) Transmitter up to 165M pixels/second
supports from CH7307
LVDS: Up to SXGA (1400x1050) --- 910GMLE Integrated dual channel
LVDS interface supported on Display Pipe B only
Supports 25 to 112 MHz single/dual channel LVDS interface:
Single channel LVDS interface support: 1 x 18 bpp
Dual channels LVDS interface support: 2 x 18 bpp
Maximum Wide panel size supported up to WUXGA
Ambient Light Sense support for automatic backlight brightness adjustments
Intel Display Power Savings Technology 2.0 support
Supports Single pipe simultaneous display with the CRT DAC and the LVDS
ports under the following conditions:
LVDS Timings must match for both display
Panel Fitting. Panning, and Center mode supported Spatial Dithering sup-
port to emulate up to 16 million colors for 18bpp TFT panels.
Spread spectrum clocking (SSC) supported Supports down and center SSC
via an SSC clock from an external SSC clock chip.
Supports down spread of - 2.5% or center spread of ± -1.25% in reference
30-50 kHz modulation rate SSC must be disabled for LVDS port and CRT
DAC single pipe simultaneous display mode.
Panel Power Sequencing support
Power down state can be either zero volt or high impedance
Integrated PWM interface for LCD Backlight Inverter Control
Supports up to 1600x1200x32 bpp at 60 Hz 18,36-bit, TTL signal supports
TTL
via NS_DS90C3202
Intel GMA 900,
910GMLE:
Internal
2D Display core frequency support from 133 MHz & 190/200 MHz @ Vcc =
Graphics Fea-
1.05 / 1.5 V depending on Host/Memory configuration
tures
3D Render core frequency support from 133 MHz & 160/166 MHz @ Vcc =
1.05 / 1.5 V depending on Host/Memory configuration
3 PCM-9588 User Manual