Advantech PCM-9588 User Manual page 40

Intel celeron m ebx sbc with dvi/ ttl/ vga/ lvds/ lan/ 6 com/ 2 sata / 6 usb2.0/ 16bit gpio
Hide thumbs Also See for PCM-9588:
Table of Contents

Advertisement

User Define
HDD Power Down [Disabled]
This item allows user to determine the time of system inactivity, the hard disk
drive will be powered down.
Mode= Disabled or 1 min ~ 15 min
Video Off Method [DPMS]
This item allows user to determine the manner is which the monitor is blanked.
V/H SYNC+Blank This option will cause system to turn off vertical and hori-
Blank Screen
DPMS
Video Off In Suspend [Yes]
This item allows user to turn off video during system enter suspend mode.
Suspend Type [Stop Grant]
This item allows user to determine the suspend type.
Modem use IRQ [3]
This item allows user to determine the IRQ which the MODEM can use.
Suspend Mode [1 Hour]
This item allows user to determine the time of system inactivity, all devices
except the CPU will be shut off.
HDD Power Down Mode [15 Min]
This item allows user to determine the time of system inactivity, the hard disk
drive will be powered down.
Soft-Off by PWR-BTTN [Enabled]
This item allows user to define function of power button.
Instant-Off
Delay 4 Sec
Wake-Up by PCI card [Enabled]
This item allows user to defines PCI cards to wake up the system from the sus-
pend mode.
Power On by Ring [Enabled]
This item allows user to define the system will resume by activating of modem
ring.
USB KB Wake-Up From S3 [Enabled]
This item allows user to enable using a USB keyboard, and allow a keystroke to
wake up the system from power saving mode.
Resume by Alarm [Disabled]
This item allows user to enable and key in Date/time to power on system
Disabled
Enabled
Data (of month) Alarm
Time (HH:MM:SS) Alarm
PCM-9588 User Manual
Allows user to set each mode individually.
Suspend Mode= Disabled or 1 min ~1 hr.
zontal synchronization ports and write blanks to the video
buffer.
This option only writes blanks to the video buffer.
Initial display power management signaling.
Press power button then Power off instantly.
Press power button 4 sec. to Power off.
Disable this function.
Enable alarm function to power on system
1-31
(0-23) : (0-59) : 0-59)
30

Advertisement

Table of Contents
loading

Table of Contents