Toshiba E-studio 5520c Printing Manual page 43

2.PRINTING FROM WINDOWS
2) Halftone
This sets how halftones are printed.
- Auto — Select this to print using proper halftone depending on the contents in the document automatically.
- Smooth — Select this to print halftone smoothly.
- Detail — Select this to print halftone in detail.
3) Resolution
This sets the resolution for printing.
- 600 dpi — Select this to print in 600 x 600 dpi.
*1
- 1200 dpi — Select this to print in 1200 x 1200 dpi. The [1200 dpi] option is available only for the PS3 Printer
driver.
*1 Images are reproduced more smoothly because jaggies on the outlines of small texts or fine lines such as graphics are suppressed.
However, 600 dpi is recommended for photos because the tone reproduction level of the image is higher.
Note that if the resolution is 1200 dpi, it takes longer than 600 dpi to print out because the capacity of data being handled is larger.
When [Photograph] or [Presentation] is selected in [Image Quality Type] of the [Image Quality] tab, 1200 dpi cannot
be displayed.
4) Use Black for All Text
Select this check box to print all texts in 100% black except white texts.
5) Distinguish Thin Lines
Select this check box to print thin lines clearly.
6) Pure Black
Select this check box to print the black contents using the black toner. When this box is selected, please select how
this function applies in the [Apply to] box.
7) Pure Gray
Select this check box to print the gray scale contents using the black toner. When this box is selected, please select
how this function applies in the [Apply to] box.
The Pure Gray option is not available when [Pure Black] is not enabled.
8) Apply to
Select how the Pure Black and Pure Gray functions apply.
- Auto — Select this to automatically select areas to be printed using the black toner when you want to print the
black (or black and gray scale) contents using its toner. When this option is selected, appropriate areas are printed
using the black toner according to the Image Quality Type option.
- Text — Select this to print only black text or black-and-gray text using the black toner.
- Text & Graphic — Select this to print only black text and graphics, or black-and-gray text and graphics using the
black toner.
- Text, Graphic & Image — Select this to print all black areas or all black-and-gray areas using the black toner.
9) Black Over Print
Select this check box when printing background content that has black text overlaid on it. If this is enabled, the gap
between text and background is minimized and color deviation is prevented. if this is not enabled, the background of
the black content will not print.
The [Black Over Print] option is available only for PS3 printer driver.
10) Apply to
Select how the Black Over Print functions apply.
- Text — Select this to print all the full-color background and then print black text on the color background.
- Text & Graphic — Select this to print all the full-color background and then print black text and graphics on the
color background.
The [Apply to] option is available only for PS3 printer driver.
11) [Restore Defaults]
Click this to restore all the image quality setting details displayed in the [Basic] tab menu to the original factory defaults.
2 PRINTING FROM WINDOWS
Setting Up Print Options 41