Resetting The Smart View Display - Taylor-Dunn TT-316-36 Operation, T Roubleshooting And Replacement Parts Manual

Item # Part #
1 71-039-02
2 71-039-11
3 74-010-00
4 71-120-10
71-119-99
71-120-90
5 71-039-11
6 88-807-01
7 94-312-00
8 00-440-02
NOTE: If your vehicle was not originally equipped with the Smart View

Resetting the Smart View Display

The meter should only be reset after the preventative maintenance has been performed. Taylor-Dunn
part number 62-027-40 Hand set (available with instructions as part number 62-027-61) must be used to
reset the meter. Refer to the handset instructions (D0-100-08) for information on the procedure to reset
the display.
Instrument Panel
Description
F&R switch
Light switch
Smart View guage
Key switch
Spacer (not shown)
Spare keys
Accesory switch
Rivet
F&R plate
Dash console
display, then the Sevcon speed control must be reprogrammed
before the display will function.
If you have the Smart View display and wish to have the
maintenance feature turned on, then the Sevcon speed control
must be reprogrammed.
To reprogram the Sevcon speed control, the speed control must
be returned to the factory. Contact your local Taylor-Dunn
for more information.
The Smart View Display will only work with the Sevcon control
system.
Illustrated Parts
Qty
1
1
1
1
1
1
2
1
1
® distributor
...
®
Page 25