Model Indications; How To Read A Circuit Diagram - Mitsubishi Eclipse Technical Information Manual

MODEL INDICATIONS

The following abbreviations are used in this manual for classification of model types.
M/T:
Indicates the manual transaxle, or models equipped with the manual transaxle.
A/T: Indicates the automatic transaxle, or models equipped with the automatic transaxle.
MFI:
Indicates the multiport fuel injection, or engines equipped with the multi-point injection.
DOHC:
Indicates an engine with the double overhead camshaft, or a model equipped with such
an engine.
Turbo:
Indicates an engine with turbocharger, or a model equipped with such an engine.
Non-Turbo: Indicates an engine without turbocharger, or a model equipped with such and engine.
FWD: Indicates the front wheel-drive vehicles.
AWD:
Indicates the all wheel-drive vehicles.

HOW TO READ A CIRCUIT DIAGRAM

Circuit diagrams are prepared as follows using these
symbols:
Indicates power take out.
A broken line indicates that
these connectors are the same :' e j;/
intermediate connectors.
The connector symbol
indicates the device
side connector (for an
intermediate connec-
tor, the male side con-
nector) as seen from
the terminal front (the
connector's
NOTE
For specific details concerning the interpretation
of circuit diagrams, refer to the separately bound
Service Manual.
Indicates input/output to/from
I
Indicates current flow downward or
upward as controlled by the control
u n i t .
Indicates harness junction where
N7OZBOOAA
Output
I
Indicates terminal No.
I