Electric Type Speedometer; Vehicle Speed Sensor - Mitsubishi Eclipse Technical Information Manual

The rotating shaft of the vehicle speed sensor is
mounted directly on the transaxle speedometer driv-
en gear. The rotation of the driven gear is transmitted
to a magnet via the rotating shaft. The IC built into
the Magneto Resistive Element (MRE) in the top
of the magnet detects the rotation of the magnet
Magnet
The electric type speedometer uses an electronic
circuit to control the electric signal from the vehicle
speed sensor and a cross coil type speedometer
that has a magnet fixed to the pointer shaft and
two coils that pass directly through it. Furthermore,
(built into MRE)
Rotating shaft
and generates a 4-pulse electric signal for each
rotation of the speedometer driven gear.
NOTE
For the operation, refer to the 1991 3000GT Techni-
cal Information Manual (Pub. No. PXSE9001).
the odometer and trip meter are directly driven by
the stepping motor with built-in gear.
NOTE
For the operation, refer to the 1991 3000GT Techni-
cal Information Manual (Pub. No. PXSE9001).
,
Al 6X0930