Input Shaft Bearing Assembly - Mitsubishi Eclipse Technical Information Manual

Hide thumbs Also See for Eclipse:

Table of Contents

- Manual Transaxle

Input Shaft Bearing Assembly

An input shaft bearing assembly is pressed into the front case

of the transaxle. The assembly consists of the bearing housing,

bearing, and seal. The seal prevents transmission fluid leakage

into the clutch disc area. Individual components are not service-

able, if any of the components fail the entire assembly must

be replaced. The clutch release bearing rides on the smooth

round surface of the retainer during clutch operation. Grease

is not required on the retainer where the release bearing rides.