To Use The External Audio Input Function - Mitsubishi Galant Owner's Manual

Comfort controls
To find the start of each track on a disc for playback
Press the SCAN button (10). "SCAN" will appear on the dis-
play and the autochanger will play back the first 10 seconds of
each track on the selected disc.
The track number will blink while the scan mode is selected.
To exit the scan mode, press the SCAN button again.
NOTE
Once all tracks on the disc have been scanned, playback
of the disc will restart from the beginning of the track that
was playing when scanning started.
The scan mode will be canceled when radio or CD opera-
tion is selected.
With a disc that contains both CD-DA and MP3 files, the
scan mode causes only files of the same format (CD-DA
only or MP3 files only) to be played.
To eject a disc
Press the LOAD/EJECT button (1). Then press one of the Disc
select buttons (3) to select the disc which you would like to
5
eject.
NOTE
When any disc is ejected, the system automatically
switches from CD mode to radio mode.
If you do not remove the disc before 15 seconds have
elapsed, the autochanger will automatically reload the
disc and stop.
5-60

To use the external audio input function

Auxiliary Audio connector
(mini-jack)
You can listen to commercially available audio equipment,
such as a portable audio system, from your vehicle's speakers,
by connecting the audio equipment to the auxiliary audio con-
nector (A).
NOTE
Use a stereo mini-jack connector to connect the audio
equipment to the auxiliary audio connector.
N00702200159