Changing Settings - Uwatec Galileo sol User Manual

4. Galileo and SmartTRAK (PC interface)
4.2

Changing settings

You can change and review all the settings described in Chapter 2 from the comfort of
your PC. The PC software allows you to see the entire array of settings at once, instead of
individually on Galileo, and to make changes more rapidly.
Click on the DIVE COMPUTER SETTINGS icon: the PC will read the settings as presently
confi gured in Galileo and show them as depicted below.
When all desired changes are made, press the WRITE icon in the dive computer settings
window to transfer the changes over to Galileo. Closing the window prior to clicking on the
WRITE icon and waiting for the transfer process to be complete will result in no changes
being saved.
NOTE:
Resetting the desaturation, all-silent mode, ppO
via SmartTRAK but you will be prompted to enter the safety code for each setting.
70
max turned OFF can be changed also
2