Display Information - Uwatec Galileo sol User Manual

3. Diving with Galileo
In a LOW BATTERY situation, the message
is displayed at the bottom of the screen
in 4-second intervals. In LIGHT screen
confi guration,
CLASSIC to allow for all the relevant
information to be shown.
! WARNING
If the REPLACE BATTERY message
appears during the dive, start the procedure to
terminate the dive, as the computer may fail.
Do not let the battery reach this condition!
In a REPLACE BATTERY situation, the
message is displayed on the bottom of
the screen in 4-second intervals. In LIGHT
screen confi guration, the display switches
to CLASSIC to allow for all the relevant
information to be shown.
48
the display switches to
In addition to monitoring the status of its
own battery, Galileo also monitors the
status of the battery in transmitters T1, T2
and TD and alerts you when a battery is low
and should be replaced. The message T1
(or T2 or TD) BATTERY LOW is displayed
on the middle row of the screen in 4 second
intervals. In LIGHT screen confi guration, the
display switches to CLASSIC to allow for
all the relevant information to be shown.
3.3

Display information

Upon immersion, the water contacts will
automatically activate Galileo, unless they
have been turned OFF. In this case, you
must activate the computer manually
before starting the dive. See section 2.8.6
for more information.
At a depth of 0.8m/3ft, Galileo starts to
monitor depth and time and also to perform
decompression calculations.