Uploading Languages; Updating Or Upgrading The Fi Rmware - Uwatec Galileo sol User Manual

You can also import text to Galileo using the TEXT IMPORT function: for instance, load a few
typical messages to communicate with your dive buddy, and when the need arises, bring up
the message on the display and show it to him or her. Or you can write down a dive plan and
then review it during the dive. The TEXT IMPORT function turns text that you write into the
appropriate fi eld using SmartTRAK into bitmap images which you can then upload to Galileo.
4.5

Uploading languages

All Galileo's menus and settings are displayed in full text in one of several languages which
you can set as explained in section 2.9.2. Similarly, while diving, warnings and alarms are
displayed in full text in the selected language.
Other languages are available at www.scubapro-uwatec.com for free download to Galileo.
To install a new language onto Galileo, download the language from the SCUBAPRO
UWATEC website to your PC. Using SmartTRAK, locate the language fi le on your hard drive,
then import it by clicking on the IMPORT button and press the arrow to transfer it to Galileo.
On the right side of the screen you will see the full list of languages installed on Galileo. You
can remove a language by clicking on it and then pressing the DELETE button.
4.6 Updating or upgrading the fi rmware
Galileo features a reprogrammable microprocessor which allows you to keep your dive
computer up to date with new UWATEC technologies. Please refer to the information
provided at www.scubapro-uwatec.com in reference to updates or upgrades.
4. Galileo and SmartTRAK (PC interface)
73