Connect The Print Server To The Printer; Connect The Print Server To The Network - SEH PS23a Installation Manual

Connect the print server to the printer

1. Turn the printer off.
2. Disconnect the printer's power cord.
3. Remove the data cable (USB) connecting the printer to the
4. Connect the data cable (USB) to the print server.

Connect the print server to the network

1. Connect the network cable to the print server.
2. Connect the power pack's power cord to the print server.
3. Connect the printer's power cord to the printer.
4. Turn the printer on.
5. Press the status button of the print server in order to print out
A status page can only be printed if the printer supports ASCII, PostScript,
DATAMAX (label printer), or the Citizen-Z (label printer) format.
Hardware Installation Guide
Proceed as follows:
computer.
Proceed as follows:
a status page.
15