Honeywell Lynx Plus Programming Manual page 9

Data Field Display
89 89 89 89
EVNT LOG EVNT LOG 80% 80% REP REP
EVNT EVNT LOG LOG 80% 80% REP REP
90 90 90 90
EVNT EVNT EVNT EVNT LOG LOG OPTIONS LOG LOG OPTIONS OPTIONS OPTIONS
91 91 91 91
AAV/REM AAV/REM AAV/REM AAV/REM PHN PHN PHN CTRL PHN CTRL CTRL CTRL
92 92 92 92
# REPS
REPS ARMED ARMED PER PER
REPS REPS ARMED ARMED PER PER
DOWNLOAD INFORMATION (✻93–✻95)
93 93 93 93
FLEXBLE FLEXBLE CALLBACK FLEXBLE FLEXBLE CALLBACK CALLBACK CALLBACK
94 94 94 94
#
DOWNLOAD DOWNLOAD PHONE PHONE
DOWNLOAD DOWNLOAD PHONE PHONE
95 95 95 95
RING RING DET DET COUNT COUNT
RING RING DET DET COUNT COUNT
Function& Programming Options
Event Log 80% Full Report Code
| [0,0]
Event Logging
[3]
0 = None; 1 = Alarm/Alarm Restore; 2 = Trouble/Trouble Restore; 4 = Bypass/Bypass
Restore; 8 = Open/Close.
Example: To select "Alarm/Alarm Restore", and "Open/Close", enter 9 (1 + 8); To select
all, enter #15.
Alarm Audio Verification (AAV)/Remote Phone Control
[2]
0 = None
1 = AAV and remote phone control
2 = remote phone control only
4 = AAV only
Notes: (1) In order to activate the Remote Phone Control feature and defeat an answering machine,
ensure that the correct ring detection count ("15") has been programmed in field ✻95.
(2) Remote phone session will be terminated if a report must be sent.
(3) Alarm Audio Verification will only function when Contact ID® is selected. AAV cannot be
used for UL installations.
(4) If an alarm will be reported to primary and secondary phone numbers, AAV can only
function via the secondary number.
(5) If an alarm will be reported to a follow me phone number (10-12 in field ✻49) AAV cannot
be used.
(6) If AAV is selected and LRR/IP communications device is enabled, you must enter "0"
(primary dialer preferred channel) as the second entry in Field ✻77.
Number of Reports In Armed Period
[0]
0 = 10 Alarm/Alarm Restore Reports;1 = Unlimited (UL installations = 0)
Flexible Callback
[0]
0 = No flexible callback; 1 = Last digit flexible;
2 = Last 2 digits flexible; 3 = Last 3 digits flexible
Download Phone Number
Note: In UL installations, downloading may only be performed if a technician is at the site.
Enter up to 20 digits, 0–9; #+11 for '✻'; #+12 for '#'; #+13 for a pause. Do not fill unused
spaces. If fewer than 20 digits entered, pressing ✻ advances to the next field. To clear
entries from field, press ✻94✻.
Ring Detection Count for Downloading/Remote Phone Control Mode
[15]
0 = Disable Station Initiated Download
1–14 = number of rings
(1–9, [#]+10 =10, [#] +11 =11, [#] +12 =12, [#] +13 =13, [#] +14 =14);
15 = answering machine defeat ([#] +15 =15)
[ ] = Programmed Table 1 Default Values
Note: System messages are logged when
- 9 -
any non-zero selection is made.