Honeywell Lynx Plus Programming Manual page 4

Data Field Display
30 30 30 30
DST WEEK DST WEEK STR/END STR/END
DST DST WEEK WEEK STR/END STR/END
ZONE SOUNDS AND TIMING (✻31– ✻39)
31 31 31 31
SINGLE SINGLE ALARM ALARM SND SND
SINGLE SINGLE ALARM ALARM SND SND
32 32 32 32
FIRE FIRE SND SND TIMEOUT TIMEOUT
FIRE FIRE SND SND TIMEOUT TIMEOUT
33 33 33 33
ALRM SND ALRM ALRM ALRM SND SND TIMEOUT SND TIMEOUT TIMEOUT TIMEOUT
34 34 34 34
EXIT EXIT EXIT EXIT DELAY DELAY TIME DELAY DELAY TIME TIME TIME
35 35 35 35
ENTRY DELAY ENTRY DELAY 1 1 1 1
ENTRY ENTRY DELAY DELAY
36 36 36 36
ENTRY ENTRY ENTRY DELAY ENTRY DELAY 2 2 2 2 DELAY DELAY
37 37 37 37
EX EX EX EXI I I I T T T T SND/QK SND/QK EXIT EXIT
SND/QK SND/QK EXIT EXIT
38 38 38 38
CON CONF F F F ARM CON CON ARM ARM ING ARM ING ING ING DING DING DING DING
39 39 39 39
PWR PWR PWR PWR UP UP UP UP PRV PRV STATE PRV PRV STATE STATE STATE
DIALER PROGRAMMING (✻40– ✻53) In fields ✻40, ✻41, ✻42, enter up to the number of digits shown.
Enter 0–9; #+11 for ' '; #+12 for '#'; #+13 for a pause.
✻
40 40 40 40
PABX ACCESS PABX ACCESS CODE CODE
PABX PABX ACCESS ACCESS CODE CODE
† Entering a number other than the one specified may give unpredictable results.
Function& Programming Options
Daylight Saving Time Start/End Weekend
[2,1]
Start End
0=disable; 1=first; 2=second; 3=third; 4=fourth; 5=last; 6=next to last; 7=third from last
†
Entering a number other than the one specified may give unpredictable results.
Single Alarm Sounding/Zone
† [0]
0 = Alarm Sounding Per Zone will be the same as the Swinger Shutdown" set in field *92;
1 = yes, limit once per arming period (also applies to long range radio output if "0" is
selected in ✻91 field)
Sounder Timeout
† [0]
0=timeout; 1=no timeout
Alarm Bell Timeout
† [1]
0 = none; 1=4 min; 2=8 min; 3=12 min; 4 = 16 min
Exit Delay
|
† [70]
00-99 = exit delay time (in seconds)
Entry Delay 1 (zone type 01)
|
† [30]
00-99 = entry delay time (in seconds)
Entry Delay 2 (zone type 02)
|
† [60]
00-99 = entry delay 2 time (in seconds)
Audible Exit Warning / Quick Exit
† [1, 1]
Exit Warn Quick Exit
0 = no; 1 = yes
Confirmation of Arming Ding
Note: Confirmation ding only sounds when LYNX is Armed Away or disarmed after being Armed
Away. If LYNX is armed by RF button (key fob), a confirmation ding occurs immediately after arming
✻
regardless of field 38 settings. If LYNX is disarmed by RF button (key fob), additional disarming
confirmation ding occurs immediately after disarming and is longer than arming confirmation ding.
† [0]
0 =
no arming confirmation ding after arming system by APX32EN keypad or RF keypad
confirmation ding after arming system by APX32EN keypad or RF keypad; 2 = arming confirmation
ding after arming from RF keypad only
Power Up In Previous State
† [1]
0 = no; 1 = yes; UL installations = 1
PABX Access Code
Enter 6 digits. If fewer than 6 digits are entered, pressing ✻ advances to the next field. To
clear entries from field, press ✻40✻
[ ] = Programmed Table 1 Default Values
UL installations = 1 (4 min) minimum
- 4 -
UL installations = 0
UL installations = 60 seconds max.
UL installations = 45 seconds max.
UL installations = 45 seconds max.
;
1 = arming