Honeywell Lynx Plus Programming Manual page 12

✻ ✻ ✻ ✻ 56 ENHANCED ZONE PROGRAMMING PROCEDURE
1 1 1 1 E E E E
Note: System displays 2-
digit selection & alpha
descriptor OR 99 "No
selection"
1 1 1 1 F F F F
Note: System displays 2-
digit selection & alpha
descriptor OR 99 "No
selection"
† See 84 ASSIGN ZONE VOICE DESCRIPTORS section for Vocabulary Index.
✻
Descriptor 2
Enter [#] + 2-digit vocabulary index† number of second descriptor word for this zone.
To change the entered index number, press [#] + desired index number.
6 = accept word and advance to descriptor 3 (descriptor 3 will be announced)
8 = accept word and advance to next zone (prompt A) – zone descriptor will be
announced
Press any other key to repeat the selected word
Descriptor 3
Enter [#] + 2-digit vocabulary index† number of third descriptor word for this zone.
To change the entered index number, press [#] + desired index number.
6 or 8 = accept word and advance to next zone (prompt A) – zone descriptor will be
announced
Press any other key to repeat the selected word
- 12 -