Honeywell Lynx Plus Programming Manual page 7

Data Field Display
TO PROGRAM SYSTEM STATUS, & RESTORE REPORT CODES (✻59–✻76, & ✻89):
With a 3+1 or 4+1 Standard Format: Enter a code in the first box: 1–9, 0, B, C, D, E, or F. Enter "#+10" for 0, "#+11" for
B, "#+12" for C, "#+13" for D, "#+14" for E, "#+15" for F.
A "0" (not "#+10") in the first box will disable a report.
A "0" (not "#+10") in the second box will result in automatic advance to the next field when programming.
With an Expanded or 4+2 Format: Enter codes in both boxes (1st and 2nd digits) for 1–9, 0, or B–F, as described above.
A "0" (not "#+10") in the second box will eliminate the expanded message for that report.
A "0" (not "#+10") in both boxes will disable the report.
With ADEMCO Contact ID Reporting: Enter any digit (other than "0") in the first box, to enable zone to report (entries in the
second boxes will be ignored).
A "0" (not "#+10") in the first box will disable the report.
Examples: For Code 3 (single digit), enter:
For Code 3 2 (two digits), enter:
For Code B 2 (Hexadecimal), enter:
SYSTEM STATUS REPORT CODES (✻59–✻68)
59 59 59 59
EXIT EXIT EXIT ERROR EXIT ERROR ERROR REP ERROR REP REP REP
60 60 60 60
TROUBLE TROUBLE TROUBLE TROUBLE REP REP REP CODE REP CODE CODE CODE
61 61 61 61
BYPASS BYPASS REP REP CODE CODE
BYPASS BYPASS REP REP CODE CODE
62 62 62 62
AC AC AC AC LOSS LOSS LOSS REP LOSS REP CODE REP REP CODE CODE CODE
6 6 6 6 3 3 3 3
LOW BAT LOW LOW LOW BAT BAT BAT REP REP CODE REP REP CODE CODE CODE
6 6 6 6 4 4 4 4
TEST TEST REP REPORT ORT CODE CODE
TEST TEST REP REP ORT ORT CODE CODE
65 65 65 65
OPEN REPORT OPEN REPORT CODE CODE
OPEN OPEN REPORT REPORT CODE CODE
66 66 66 66
AWAY/STAY AWAY/STAY AWAY/STAY AWAY/STAY REP REP REP REPORT ORT ORT ORT
67 67 67 67
RF RF RF RF TRANS TRANS LB LB LB LB REP TRANS TRANS REP REP REP
68 68 68 68
CANCEL REP CANCEL REP CODE CODE
CANCEL CANCEL REP REP CODE CODE
RESTORE REPORT CODES (✻70–✻76)
70 70 70 70
ALARM RES ALARM RES REPORT REPORT
ALARM ALARM RES RES REPORT REPORT
71 71 71 71
TROUBLE TROUBLE RES RES REP REP
TROUBLE TROUBLE RES RES REP REP
Function& Programming Options
3 | 0
3 | 2
#+11 | 2
Exit Error Report Code
[1]
Trouble Report Code
| [1,0]
Bypass Report Code
| [0,0]
AC Loss Report Code
| [0,0]
Low Bat Report Code
| [1,0]
Test Report Code
| [1,0]
Open Report Code
†† [0
]
Arm Away/Stay Report Code
†† [0,0]
AWAY STAY
RF Transmitter Low Battery Report Code
| [1,0]
Cancel Report Code
| [1,0]
Alarm Restore Report Code
[1]
Trouble Restore Report Code
| [1,0]
[ ] = Programmed Table 1 Default Values
2nd digit is automatically sent as 2nd digit of the zone alarm report
✻
code programmed in 56, if expanded or 4+2 reporting is selected.
(†† 2nd digit is automatically sent as the user
number if expanded or 4+2 reporting is selected.)
2nd digit is automatically sent as 2nd digit of the
zone alarm report code programmed in
expanded or 4+2 reporting is selected.
- 7 -
✻
56, if